No, the PIX+ is not compatible with a Glock 26 Gen 3 even if it has a Glock 19 slide.

Here's a dimension of the kit when folded.

No, the charging handle is not compatible with a Glock 26.

No, you need to order it separately.

I’ll go ahead and share this with our management and engineering team. If we release a compatible version in the future, we’ll be sure to announce it through our mailing list.

We haven't tested it with this specific trigger. If it has the same profile as the OEM trigger, then we believe it should work.

We haven’t tested our product with those specific models, and at the moment, we don’t have any plans for a compatible version. However, if we do release one in the future, we’ll be sure to notify our mailing list.

No, the charging handle will not fit the Glock if it has a switch or without modification.

None of our products, including the P-IX, require a license to purchase as we do not sell serialized gun parts. However, due to the ever-changing nature of state laws, we are unable to provide legal advice. We recommend reaching out to your local FFL or gun store for assistance. 

No, as long as both the frame and slide are OEM, then it is compatible.

No, the PIX+ is not compatible with an M-lok attachment.

No, this will only fit the Glock 23 Gen 4.

Yes, it will work with our PIX+.

Yes, there is a folding option available under the stock/brace drop-down menu on our product page.

Additionally, you are correct—the buffer tube is a standard Mil-Spec, so you can use any compatible stock with it.

The width measurement is 36mm (1.41 inches). If you're planning to use a suppressor, it might be best to remove the metal front guard, as Glock barrels move up and down during firing. Additionally, there are various barrel types for different Glock models compatible with the PIX, including those with a front screw attachment. Each setup may require a specific approach, so it's recommended to assess each case individually.

The PIX+ MG includes additional accessories such as the MG9 forward angled mag pouch and SR20 side rails (right and left), while the PIX+ Basic offers only the essential components: the P-IX+ housing, PG9 pistol grip with integral mag holder, Brace or Stock (depending on your selection in the drop-down menu), CR20 Cheek Rest, and Metal Front Guard. Additionally, when selecting from the drop-down menu, the description and image will update to reflect what’s included.

The lower part of the charging handle is discontinued and is not necessary. The side pic rails are available for purchase separately here. 

Yes. We ship to all US states and territories

We have not tried that

This kit does not impact the barrel at all. However, if you opt for the 20/20TFA or P-IXPFA, they do include a longer barrel that is swapped with your factory barrel.

We do ship these to California without issue. I can't comment on legal compliance. 

None taken. And to answer your question, it is not compatible with Shadow Systems. This is for Glock. Full compatibility list is available on this page. 

That is a legal question and we are not able to provide legal advice. Apologies. However, it has been discussed extensively online. I suggest you Google it.

You may have to modify the charging handle a bit

The charging handle fits perfectly over stock Glock sights. For taller sights, you can use a dremel to carve out space for them in the charging handle. If you're handy with a Dremel, you can do it. Otherwise, you may need to ask for help from a gunsmith or someone else who is handy and has the right tools. 

You'd have to modify the P-IX charging handle to accommodate the sights

Yes. You could mount the red dot on the P-IX+ upper rail

It doesn't fit. The P-IX is designed to hold compatible guns very securely in place inside the system. G26 is just not the right size for the system. 

This setup is compatible with P-IX+

I don't think so. But you can on the 20/20TFA

https://dev.recovertactical.com/product/20-20tfa-pistol-carbine-kit-for-glock-non-sbr-nfa/

We have our own picatinny side rails for P-IX included in the MG kit or available for purchase separately.

Cool. Good to know. Really appreciate the followup

In general, no. In theory, it would fit an exact clone. But I don't think any of the models are exact clones. One of the issues you might face is that the charging handle is designed to fit perfectly into the Glock slide grooves. The exact shape of your gun also matters.

One user shared "doesnt fit p80 or dagger due to a different grip angle"

Possibly. We have only tested with standard triggers. Feel free to order, try and return if it doesn't work out (a per our return policy). 

Yes

yes

In general, no. In theory, it would fit an exact clone. But I don't think any of the models are exact clones.

That would most likely be a "GEN2" which is compatible (There is no GEN1). And yes, we can ship anywhere. Although when billing and shipping don't match, it can slow the order down as it will be verified manually. In some cases, you may be asked to provide proof of your connection to the shipping address.

Fair enough. It is compatible with your model

Yes

Thanks for the love! Nothing planned at this time though.

There is no loss of control of the trigger motion. When the unit is closed, everything is held very securely. This is a follow-up from the same reviewer: https://www.youtube.com/watch?v=Osi3r2goEOo And this one: https://www.youtube.com/watch?v=OwX0W7mXObE

No plans at this time

Apologies but we are not allowed to provide legal advice. You can read our disclaimer here. Any followup questions should be addressed to a lawyer.

Correction: It is compatible with any barrel, except for compensated barrels.

It will work with some and not others. We haven't tested with the Lone Wolf so can't say one way or the other. Feel free to try and send it back (in new condition) if it doesn't work out. If it does or doesn't, we'd love to know!

We don't provide legal advice. You can read our disclaimer here. Any follow-up should be addressed to a lawyer.

End of this month. Although, technically, it's already shipping. The only thing not included in the early release version is the MFG Metal Front Guard which will be available for purchase separately at a discounted rate for early release purchases - also at the end of March.

Yes

Nothing planned right now 

We don't deliver to the Philippines. You can try our resellers zahal.org or israeldefensestore.com . P-IX only accepts Glock. We may add versions for other models in the future. 

No. You can see the fit chart tab above for a full list of compatible models. 

Yes, it will fit with oem sights

538 grams / 1lb. 3oz.

No. Only on the Glock models listed in the fit chart on this page.

It fits all Glock mags since it uses the Glock's magazine well

It won't

Around January

Sure. P-IX will take any AR-compatible stock+tube. Ours is available for purchase separately here. 

Sorry but that won't work

OEM Glock only (as far as we know)

Yes. It works with these: G35 GEN3, G35 GEN4, G35 GEN4 MOS (see the fit chart tab on this page for the full list)

Nothing planned at this time but stay tuned

That is an error. It does fit Gen2. We have updated the fit chart to reflect that.

Only right handed

The only possible issue are the sights. you may have to modify the charging handle or replace the sights for it to be compatible. Feel free to order and return it as per our money-back guarantee if it doesn't work out. If you do try it, I'm sure other users here would be grateful to know how it worked out for you.

It does work with the 19X. It is not available to be shipped outside the US. In the future, it will likely be available through resellers who do ship this type of item internationally but not at this time.

P-IX is not compatible with the G21SF. For the full compatibility list, see the fit chart. the Glock 21 is compatible with the 20/21 Stabilizer Kit.

That is not an easy question to answer since it will vary from gun to gun

P-IX is compatible with G22 GEN3, G22 GEN4, G22P, G34 GEN3, G34 GEN4, G34 GEN4 MOS, G34 GEN5, G34 GEN5 MOS (see the Fit Chart tab for a full list of compatible Glocks)

You can order through Zahal.org or IDS.

Same as you would connect any stock to an AR-15

It won't fit with the flared magwell installed. You would have to remove that first.

It will not - only a G17 (not G17L)

Yes

Sorry - got that wrong. You need to remove the magazine and then drop it forward with the P-IX charging handle.

If you mean which gun sights can be on your weapon prior to installing the P-IX, the answer is only stock, OEM sights. If you mean what sights can you attach to your P-IX unit, then any sights that can attach to a rail like the Sightmark and Flip Up sights we carry.

You can tighten the stiffness of the trigger by tightening down the screws on the trigger.

Thanks for the love Jason. Will pass your request on.

We don't carry any extended barrels at this time

lol. We'd rather people actually looked for their answer on the product page first. It's also the nature of the game. People move very quickly these days on their devices and scan rather than read. Our job is try to simplify as much as possible so people see exactly what they need to see where they expect to see it to help them make informed purchase decisions.

Time will tell

The P-IX might need to be modified to make it work

Passed this question up the chain and received an emphatic "No" on all counts 

It is not compatible - only Gen 3 & 4 (for G22). See the Fit Chart tab on this page for a full compatibility list

The 20/20N is compatible with the Glock 27. Although, the GEN 5 slide is not compatible with the bundled charging handle. Since the Stabilizer frame covers the slide grips, you will need an alternate way to rack the slide like an RMR or some other solution. If you have a GEN 5 slide and an alternate way to rack the slide, you can use the 20/20N.

As far as a P-IX for G27, possibly upcoming but nothing firm.

Not sure what you mean "missing". Maybe you are referring to a design change that entered into production since we released the original images where we removed a section of rail above the ejection port. In the final version of the product, the upper rail goes end to end with a break over the ejection port.

The "B" (basic) includes only the housing and pistol grip (the black areas of this image) (you can also choose with out without a stock + buffer tube) in the options above)

The "MG" (reference to MG9 angled mag pouch) has the MG9 angled mag pouch and SR20 side rails included as well

As noted above, the stock can be added via the dropdown menu above to either the B or MG, and we also have an add-on option for flip up sights.

You are correct. This image is current:

We do not provide legal advice or guidance. You can read our disclaimer here. Any follow up questions should be addressed to a lawyer.

It will not fit. Sorry, but I don't have the answer to your followup question

Exact we don't have. I can say that the P-IX units are 95% assembled at our Florida warehouse. There is one part in the air now. As soon as it arrives, units will start to ship - any day now.

The top pic rail is not removeable

1. Yes
2. Yes

You can order it here without a stock. At this time, we are not making a stabilizer attachment but any standard AR attachments will work.

Yes to both questions

It does not. You can see the full compatibility list in the "Fit Chart" tab on this page.

Yes. As long as it is AR compatible

Yes

If they use a standard thread buffer tube, they will attach. Can't comment if it will fit and clear the brace's rails when fully collapsed as we have not tested these specific items with P-IX. P-IX does come with a money back guarantee (as do all our products) so feel free to try it risk-free and let us know how it works out.

Yes

End of this month

No

Hopefully, but can't say for certain. We have not had the opportunity to test with every variation/option on the market at this point. We do have a money back guarantee so you can always order and send it back for a refund if it does not work out.

We are working on putting the finishing touches on the product. We did experience a delay related to global supply chain issues and we are still making a few tweaks to the finished product. It is coming along very nicely and we expect it to ship in a matter of weeks.

Not sure what you mean by that but the P-IX uses a a standard AR buffer tube thread so if you can find an adapter that screws in to the threads then you can use it

It is compatible

It does not. See the fit chart tab on this page for a full compatibility list

Yes - one especially designed for this system. See the video on the description for an overview of the installation.

It will fit

Nothing planned at the moment

Yes

The unit is designed for and tested to fit OEM Glock only

It does not fit Glock 29. See the fit chart above for the full compatibility list

The bundled tube and stock are collapsible

It's made from glass reinforced polymer. There is no wiggle

Everyone feels trigger pull a bit differently. In our testing, it feels like a normal Glock trigger. Would love your feedback on it once your unit ships.

Approx. End of May

It is. In the "Fit Chart" tab.

It is not. You can see the full fit chart above

Small. But not sure of exact size

That won't work

End of March/early April

It cannot

Nothing at the moment

We may create one for the 43X in the future. We do ship to Israel in general, but not this product (it is "Not For Export"). Our products are available for purchase in Israel through zahal.org

Hopefully

No plans at this time

Nothing planned right now. For G19, we have compatibility for G19 GEN3, G19 GEN4, G19 GEN4 MOS, G19 GEN5, G19 GEN5 MOS ,G19X. See the fit chart above for full compatibility list

No, but it attaches easily

We do not provide legal advice and cannot comment on local rules. Please read our disclaimer here. Any follow-up questions should be addressed to a lawyer.

Sorry, but it is not available for international shipping via our website. It will likely be carried by some our international distributors. You can see some of them here.

Yes

It is not compatible

That won't work

It does not. See the Fit Chart tab above for all compatible models

Not yet, but make sure you are subscribed. We will be sending that out via email soon

Possibly. Nothing planned at the moment

If you choose the No Stock option, it will ship without a buffer tube

It's correct

Remove the mag and pull the charging handle back

Possibly

It is not

It's secured with 2 bolts and needs an allen wrench (included in the kit)

We do not provide legal advice and cannot comment on local rules. Please read our disclaimer here. Any follow-up questions should be addressed to a lawyer.

Glass-reinforced Polymer

It doesn't come included. You can add AR compatible flip-up sites. To see what's included which each bundle, choose options for all 3 dropdowns above and the description and image will update to reflect what's included.

Only OEM Glock

Building in, nothing that I know of - but the thread is standard and will take anything made to fit in a buffer tube thread

The included buffer tube & stock do not fold. We may add a folding one in the future. And you can also purchase an AR compatible folding stock.

It's compatible with these versions of the G19: G19 GEN3, G19 GEN4, G19 GEN4 MOS, G19 GEN5, G19 GEN5 MOS, G19X

Yes

It's a standard thread - fits anything made for an AR buffer tube thread

Here are the dimensions in milimeters

And here in inches (and with the bundled stock, overall length is 21.39 inches)

Only OEM Glock

Good point. It will fit. But it won't stay in place because the G26 doesn't have a rail.

Pricing has now been released. Scroll up for details (from $199)

It's possible. 

No spec sheet at the moment but everything in the unit is made from glass-reinforced polymer

The stock is optional. Whether adding the stock will trigger a legal requirement to register the weapon as an SBR in your jurisdiction is not something we are qualified to comment on. You can read our disclaimer here. Any further questions should be addressed to a lawyer.

Yes. You can see the fit chart tab above for a full list

It will not fit a G43

Nothing solid right now but stay tuned

Nothing planned

Not yet, but it's coming. Alternately, you can buy the base unit and add any AR compatible brace

OEM Glock only

The P-IX is officially launched. Priced from $199 and expected to ship in March

Check the fit chart tab above

It is not. See the full fit chart above for compatibility

OEM Glock only

See the fit chart above

We do not provide legal advice and cannot comment on local rules. Please read our disclaimer here. Any follow-up questions should be addressed to a lawyer.

Only Glock

It uses our patented charging handle system which we have been using for the past 5 years and works flawlessly since it is a bolted in addition