Will it fit a gen 2 Glock 21?

The 20/21 Stabilizer kit is only compatible with Glock 21 Gen 3 to Gen 5 MOS including the SF.

On the Recover Tactical® 20/20®N Stabilizer Kit for Glock – For all 9mm & 357 Double Stack Gen 1-5 Glocks incl. Glock 26. Compatible w/ all Double Stack Gen 1-4 SW40 Glock incl. Glock 27 When I select the stock instead of the brace, does that make my Glock 47 an SBR or is it still a pistol brace?

Sure wish you could get a straight answer on this. I’ve posed it to these guys and my local ffl and everyone’s vage and beat around the bush, won’t give a straight answer.

Is it compatible with the Franklin Armory G-S173 binary slide for G17? I don't mind making minor modifications if needed.

We haven’t tested it with that specific configuration. However, we do have customers who have successfully used the kit with the Franklin Armory G-S173 binary slide.

Will this fit Ruger RXM?

At this time, we don’t a compatible S-Pro version for the Glock 43X. However, if we release one in the future, we’ll be sure to notify our mailing list.

What is the length of the basic 20/20 when folded?

The length of the kit would be 11" x 2" x 5"

I saw a guy on youtube using this for a taurus tx22. and it seemed to fit. can you guy see if it fits fine? i been kinda looking into purchasing a glock one day as well. so i can to see if this would work for this and future purchases.

We haven’t tested it with that model, so we can’t confirm compatibility. As a general rule, our kits are designed and tested to fit OEM models that is listed on our compatible models.

Will this fit a Derya DY9 ? (Glock 19 clone)

We haven’t tested it with that specific model. If we release a compatible version in the future, we’ll be sure to notify our mailing list.

Recover Tactical® 20/20®N Stabilizer Kit for Glock is legal in Washington State ?

None of our products, including the 20/20®N, require a license to purchase, as we do not sell serialized gun parts. However, due to the ever-changing nature of state laws, we are unable to provide legal advice. We recommend reaching out to your local FFL or gun store for assistance.

Will it fit on a Glock 23 Gen5?

No, the Glock 23 Gen 5 slide is not compatible with the 20/20N.

Dumb question, probably but does carrying with the brace folded and on the left side with the G7 holster cause any interference, or is there enough clearance for it to be folded in the holstered position?

Yes, there would be no issue with the G7 and the 20/20N even if its folded.

I’m assuming this will not fit a g20 gen3/4?

No, it will not fit the 20/20N, but we do offer the 20/21 Stabilizer Kit, which is designed for large-frame Glocks. https://dev.recovertactical.com/product/recover-tactical-20-21-stabilizer-kit-for-10mm-45acp-large-frame-glocks/

Will this kit fit a 19X?

Yes, it is compatible with 19X.

Is it compatible with the glock 17L gen 5? ik it's not in the list but it did come out pretty recently and i can't see why it wouldn't fit. Thanks in advance ?

Yes, it is compatible with G17L Gen 5.

Do you know if this is compatible with the Advantage Arms .22lr conversion kit slide?

We haven’t tested it with that specific model. If we release a compatible version in the future, we’ll be sure to notify our mailing list.

Any idea if this will work with an aftermarket SCT Glock 19 frame? It is very similar to the Glock, however it has 4 pic slots like the P80. Any help on whether I should try the 20/20 or the 20/80 would be appreciated. Thanks

No, in theory, it would fit an exact clone. However, I don’t believe any models are exact clones.

Will this fit a Taurus g3

No, this will not fit the Taurus g3. If we do add a compatible version, we will send out an email to our mailing list.

Will the 20/20N fit a Glock 19 Gen 1? Thanks

Yes, the 20/20N is compatible with the Glock 19 Gen 1.

Would you know if it's compatible with P80 PF940SC?

The 20/20N is not compatible, but the 20/80 Stabilizer Kit is. It has been designed and tested to fit the following models: PF940V2, PF940C, PFC9, and PFS9. I've added a link below.Recover Tactical® 20/80 Stabilizer Kit

Any plans on making a stock/brace kit for the Canik lineup?

Yes. We will send out an email to our mailing list if anything new is released.

Would it be reasonable to expect a Dagger compatible version in the next couple years or not?

Maybe. Not sure. Although I have seen users get this model to work on a Dagger. According to one thread on Reddit, the Dagger frame fits in the kit. But the bundled charging handle won't fit the slide - unless you are running an OEM Glock slide (is that possible?). Since the kit covers the slide grips, you will need an alternate way to rack the slide. Many users just use their installed red dot as a charging handle. Just to be clear, we have not tested with PSAS so this is all based on user feedback. Hope this helps.

Confused? Will this fit a Glock G19 Gen 5 with AmeriGlo sights?

It fits G19, Gen 5. In terms of Ameriglo, they make many different types of sights. The only potential issue there is that depending on which Ameriglo sight, you may not be able to install the included charging handle. Since the kit covers the slide grips, you will need an alternate way to rack the slide. Many users just use their installed red dot as a charging handle. If that works for you, you are good to go.

Will this work with the Franklin armory Binary Trigger slide? I’m unsure if the G18 style Binary switch will interfere with the frame or not. Thank you so much

Yes, as long as the frame is Glock. The only issue I foresee is that the bundled charging handle will not fit. Since the stabilizer frame will cover the slide grips, you"ll need an alternate way to rack the slide like a red dot sight.

Can a Glock GTL 11 tactical light fit on the lower picatinny rail?

All of our rails are "Picatinny". According to one seller of these lights I found through a search (huntac.de), these lights are Picatinny rail mounted - so it should work. If you haven't yet purchased a light, I can recommend our curated collection of weapon lights here.

Hi. Will is the 20/20N compatible with the Glock 43x MOS model? Your reseller, Zahal.org, indicates that it is so wanted to confirm with you. If not, what would be the compatible stabilizer+brace kits compatible to the Glock 43x MOS. Thanks in advance!

You need the 20/20N43. It is the same as the 20/20N but includes 3 additional parts that enable compatibility for G43X (exactly my personal setup). Click here to see it.

Can you provide a list of all the non-compatible glocks. Looking to makes sure the fit is perfect on the 20/20N

Can't provide a list of non-compatible Glocks, but this is the full list of compatible Glocks: Fully Compatible with these GLOCK pistols, ALL GENERATIONS*G17, G19, G24, G25, G26*, G31, G32, G34, G45 Fully Compatible with these GLOCK pistols, ALL GENERATIONS* EXCEPT GEN 5 SLIDES.G22, G23, G24, G27*, G35 While the 20/20N Stabilizer frame itself is compatible with GEN 5 .40 G22, G23, G24, G27*, G35 Glock models, with these models, the GEN 5 slide is not compatible with the bundled charging handle. Since the Stabilizer frame covers the slide grips, you will need an alternate way to rack the slide like an RMR or some other solution. If you have a GEN 5 slide and an alternate way to rack the slide, you can use the 20/20N. If you have any of these Glock models G22, G23, G24, G27*, G35 WITHOUT a GEN 5 slide, the 20/20N is fully compatible. *There are known fit issues at times with the UCH17 Charging Handle and the Glock 26/27 frames. The UCH17 Charging Handle is not compatible with RTF “Moon Cut” slides

Will it work with a Glock 20 gen 5

No, but the 20/21 stabilizer is. See it here.

Is this California legal?

Apologies but we are not able to provide legal advice. You may check our disclaimer here. Any further questions should be addressed to a lawyer.

Will this fit a model 24 Glock?

Yes. As long as it does not have a Gen5 slide. If it does, 20/20N is still compatible but the bundled charging handle is not, so you need to find and alternate way to rack the slide like an RMR.

Is there a way to remove the brace? So we can operate it "braceless"

Sure. Remove the pin on the rear.

Does the 20/20 come with the upper rail mount for mounting a sight? Does it come in one of the kits?

It is not included in the kit and is available for purchase separately.

Is the new rule affect these braces ?

We don't provide legal advice. You can read our disclaimer here. Any follow-up questions should be addressed to a lawyer.

Will this item fit my Glock 19 gen 5 with beaver tail?

You would need to remove the optional backstrap for 20/20N to be compatible

I have a Taurus G3 full size same ergonomics as a Glock 17, which model should I get?

This one, the 20/20N is compatible with Glock 17

Will this brace for a G43x ?

It will not work for a G43X. 20/20N is compatible with Double-stack Glocks. G43X is single-stack.

Any 20/20 kit will work on a Glock 26 Gen 4 ?

Yes. This one. The 20/20N (as long as it does not have an RTF “Moon Cut” slide. If it does have an RTF “Moon Cut” slide, the Stabilizer will fit, but the charging handle won't, so you will need an alternate way to rack the slide.

Hello just checking if this fits gen 2 Glock17 .. no front rail?

It is compatible with Glock 17, GEN2

which one will it fit glock 23 gen 4

This one, the 2020N is compatible with the G23 Gen4

I know it is not compatible with Glock clones broadly speaking, especially ones like the Dagger that have different dimensions, but I am wondering if anyone has tried using it with the aftermarket slides that are specifically designed to mirror OEM (Lone Wolf etc.) and have identical serrations.

The brace doesn't attach to the slide only the charging adapters do. The brace attaches to the frame of the pistol. If you are using a standard Glock frame the slide shouldn't make any difference except to the charging handle adapter. In fact no part of the 20/20 touches the slide except charging adapters.

Does this fit a Gen 5 19/45 that has an extended beaver tail backstrap attached to it?

It looks like it should work without issue assuming you are using an OEM Glock backstrap or any other that does not add width to the gun near the top of the grip. We haven't tested in this configuration so I can't say with certainty. If you do have any issue, you can send it back for a refund as per our money back guarantee.

Does it compatible with PCH (Picatinny Rail with charging handle)?

The PCH-17 is not compatible with the 20/20. However, you can use the UR20 Upper Rail or GB20 Glass Breaker to add a rail mounted accessory to the 20/20.

I see questions about the 20/20 not fitting the PSA Dagger, Has anyone actually tried it with the Dagger?

I’ve got my 20/20 on a dagger works fine. You just can’t use that charging adapter

Do you have a brace that will fit a Glock 34?

Yes, this one, the 20/20N fits the Glock 34

Can the brace close to the left so left handed shooters can carry?

It does not fold to the left. When this question was asked previously, another user responded "I'm a lefty. The unit works fine for left handed shooters. The only thing is that folds in the opposite direction."

Could I get this to fit on a sig p320 x series full size? I understand it's designed for Glock but thought I'd ask. If not, when will you guys make one for the p320?

It is designed for and tested to fit on the OEM Glocks listed in the fit chart tab here. It's possible we will release one for Sig in the future but nothing planned at this time.