Do you have any rail adapters for 1911 3.25 inch barrel?

We do have the CC3C Grip for officer size 1911.https://dev.recovertactical.com/product/recover-cc3c-grip-and-rail-system-for-the-compact-1911-officers-sized-1911/

Will this fit M1911-A1 FSP GI 5” 45 ??

If your 1911 is a full-size pistol without an integral rail our CC3P grip and rail system could work. The best way to know for sure if it will fit is to measure these points on your weapon (in millimeters). If they match, it will fit:

Hi There would this fit a GSG 1911 .22? If this doesn't fit can you recommend a similar set of grips? Do you post to Northern Ireland?

It fits standard Frame 1911s only, no “double stacks” or compact frames. Our kits and accessories are not available for shipping outside the U.S.

Is this grip adapter, and the model without interchangable grip panels, compatible with thin line grip screws and escutcheons or does it require standard grip screws and escutcheons?

We recommend using the thin one but it is compatible with both.

Will this fit a 1911 with an ambi safety (specifically a safety with the little wing that sits behind the grip on the right side) or will I need to remove material from under the grip to accommodate that little wing?

Yes, it should be compatible. Just to be sure you can check by measuring these points on your gun. If they match, it will fit.

will this fit into the safari land 6304 - ALS/SLS Tactical Holster?

The Safari Land 6304 - ALS/SLS Tactical Holster is a custom fit holster for the 1911. Adding the Recover rail will slightly increase the width, which may cause a fitment issue after installation of the rail.

Do you know if this will fit a llama max-1 45 l/f ?

No, it will not fit the Llama Max.

Will the nitecore npl30 fit on the grip and rail system

According to their website, the light is designed for rails at least 4" long. Our rail is 1.8" long. Although, I do find that spec strange. A 4" rail is really long which would make this light incompatible with most pistols. I suspect that may be an error.

Do you of this will fit a duty holster? I know for instance some of the holsters like for a Glock with a tact light option will work with most 1911's as long as there's a tact light on it. Sure the holster locking on the light mostly rather then the frame.

As far as I know there are no off-the-shelf duty holsters that this would fit. It would likely need to be custom made. Have you considered our HC11 holster (scroll down to the bottom) - specifically designed for this setup?

Which One Will fit on a Taurus 1911 9mm Full - CC3H Or CC3P? Dimensions Total Length - 221.9mm Total Height - 139mm Width - 37.4mm Pipe Length - 127mm Thanks in Advance.

Both CC3H & CC3P are for full size 1911's. The difference between them is that CC3P has interchangeable grip panels while CC3H does not.

Will they fit a tisas 1911 carry?

It depends on the model. If it is a full size, single stack, with no built-in rail, it will work

Will this fit a girsan MC1911C XLV

It's not clear to me if this is a full-size 1911 or not. If it is, it will fit. You can check by measuring these points on your gun. If they match, it will fit.

Do you sell, or can I request a different color grip insert with the cc3p grip and rail system?

Yes. There are a few options in the dropdown menu above.

Where can I purchase grip panels for this ?

"Talon Grips" makes replacement panels for this unit.

Will this fit a Browning 1911-380

This is for full size 1911's. Your gun should be compatible with our CC3C system. Check it here. Just be sure to check the measurements on the page against your gun.

Does this fit a citadel 1911?

Citadel makes several models. The best way to know for sure if it will fit is to measure these points on your weapon (in millimeters). If they match, it will fit:

Will this fit a springfield emissary 45?

It won't. This is designed for 1911's that do not have a rail. The model you mentioned has a built-in rail.

Is there this product for model IMBEL (Brazil) 1911 MD2 GC 45 (2011) ? product website link https://www.imbel.gov.br/index.php/pistolas/88 link image below: https://www.imbel.gov.br/images/produtos/pistolas/45GCMD2.png

It looks like it should fit but if you want to be sure, measure these points on your gun. If they match, it will fit

Can this be used with a magwell? (Full-size Kimber 1911 with kimber magwell)

It works with most - but we haven't tested with the Kimber one. If it doesn't work, you can always send it back for a refund as per our money back guarantee.

Will it fit a Chiappa 1911-22

It sounds like you may have an incompatible weapon. Please send an email with photos to service@dev.recovertactical.com. They will either be able to help you figure this out or give you instructions for return and refund.

Is this compatible with a Surefire X300U-A or Surefire X300U-B?

Yes. It is compatible with both

Will it fit a norinco 1911 7 round mag

Check these points on your gun to measure for compatibility

Is this compatible with any Inside the Waistband holsters?

Yes. You can order compatible holsters from these vendors: https://www.swaprigholsters.com/ https://www.mieproductions.com/ https://www.whitehatholsters.com/ https://www.cooksholsters.com/